Luup UPNP Files

From MiCasaVerde
Jump to: navigation, search

The following is the contents of the file Constants.h which defines the strings used for file device types, services, actions, variables, etc.

/*
Copyright (C) 2008 Mi Casa Verde, Inc., a Nevada Corporation 
All rights reserved. This software may not be used or distributed without express consent.
*/


Contents

Device Types

#define DEVICETYPE_HOME_AUTO_GATEWAY    "urn:schemas-micasaverde-com:device:HomeAutomationGateway:1"
#define DEVICETYPE_BINARY_LIGHT         "urn:schemas-upnp-org:device:BinaryLight:1"
#define DEVICETYPE_DIMMABLE_LIGHT       "urn:schemas-upnp-org:device:DimmableLight:1"
#define DEVICETYPE_THERMOSTAT           "urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1"
#define DEVICETYPE_HEATER               "urn:schemas-upnp-org:device:Heater:1"
#define DEVICETYPE_HUMIDITY_SENSOR      "urn:schemas-micasaverde-com:device:HumiditySensor:1"
#define DEVICETYPE_MULTI_IO             "urn:schemas-micasaverde-com:device:MultiIO:1"
#define DEVICETYPE_DOOR_LOCK            "urn:schemas-micasaverde-com:device:DoorLock:1"
#define DEVICETYPE_DOOR_SENSOR          "urn:schemas-micasaverde-com:device:DoorSensor:1"
#define DEVICETYPE_ZWAVE_NETWORK        "urn:schemas-micasaverde-com:device:ZWaveNetwork:1"
#define DEVICETYPE_ZIGBEE_NETWORK       "urn:schemas-micasaverde-com:device:ZigbeeNetwork:1"
#define DEVICETYPE_INSTEON_NETWORK      "urn:schemas-micasaverde-com:device:InsteonNetwork:1"
#define DEVICETYPE_USB_UIRT             "urn:schemas-micasaverde-com:device:USBUIRT:1"
#define DEVICETYPE_TEMPERATURE_SENSOR   "urn:schemas-micasaverde-com:device:TemperatureSensor:1"
#define DEVICETYPE_POWER_METER          "urn:schemas-micasaverde-com:device:PowerMeter:1"
#define DEVICETYPE_MOTION_SENSOR        "urn:schemas-micasaverde-com:device:MotionSensor:1"
#define DEVICETYPE_SMOKE_SENSOR         "urn:schemas-micasaverde-com:device:SmokeSensor:1"
#define DEVICETYPE_GENERIC_SENSOR       "urn:schemas-micasaverde-com:device:GenericSensor:1"
#define DEVICETYPE_LIGHT_SENSOR         "urn:schemas-micasaverde-com:device:LightSensor:1"
#define DEVICETYPE_IR_TRANSMITTER       "urn:schemas-micasaverde-com:device:IrTransmitter:1"
#define DEVICETYPE_WINDOW_COVERING      "urn:schemas-micasaverde-com:device:WindowCovering:1"
#define DEVICETYPE_GENERIC_IO           "urn:schemas-micasaverde-com:device:GenericIO:1"
#define DEVICETYPE_REMOTE_CONTROL       "urn:schemas-micasaverde-com:device:RemoteControl:1"
#define DEVICETYPE_COMBO_DEVICE         "urn:schemas-micasaverde-com:device:ComboDevice:1"
#define DEVICETYPE_CAMERA               "urn:schemas-upnp-org:device:DigitalSecurityCamera:1"
#define DEVICETYPE_CAMERA2              "urn:schemas-upnp-org:device:DigitalSecurityCamera:2"
#define DEVICETYPE_SERIALPORT           "urn:micasaverde-org:device:SerialPort:1"
#define DEVICETYPE_SERIALPORTROOT       "urn:micasaverde-org:device:SerialPortRoot:1"
#define DEVICETYPE_SCENE_CONTROLLER     "urn:schemas-micasaverde-com:device:SceneController:1"
#define DEVICETYPE_SCENE_CONTR_LED      "urn:schemas-micasaverde-com:device:SceneControllerLED:1"
#define DEVICETYPE_ENERGY_CALCULATOR    "urn:schemas-micasaverde-com:device:EnergyCalculator:1"
#define DEVICETYPE_TEMP_LEAK_SENSOR     "urn:schemas-micasaverde-com:device:TempLeakSensor:1"
#define DEVICETYPE_RELAY                "urn:schemas-micasaverde-com:device:Relay:1"
#define DEVICETYPE_ALARMPANEL           "urn:schemas-micasaverde-com:device:AlarmPanel:1"
#define DEVICETYPE_ALARMPARTITION1      "urn:schemas-micasaverde-com:device:AlarmPartition:1"
#define DEVICETYPE_ALARMPARTITION2      "urn:schemas-micasaverde-com:device:AlarmPartition:2"
#define DEVICETYPE_SIREN                "urn:schemas-micasaverde-com:device:Siren:1"
#define DEVICETYPE_FLOOD_SENSOR         "urn:schemas-micasaverde-com:device:FloodSensor:1"

#define DEVICETYPE_SCENE                "urn:schemas-micasaverde-com:device:Scene:1"

IR Device Types

#define DEVICETYPE_IR                   "urn:schemas-micasaverde-com:device:IrDevice:1"
#define DEVICETYPE_TV                   "urn:schemas-micasaverde-com:device:tv:1"
#define DEVICETYPE_CABLE                "urn:schemas-micasaverde-com:device:cable:1"
#define DEVICETYPE_SATELLITE            "urn:schemas-micasaverde-com:device:satellite:1"
#define DEVICETYPE_VIDEO_ACCESSORY      "urn:schemas-micasaverde-com:device:videoaccessory:1"
#define DEVICETYPE_VCR_DVR              "urn:schemas-micasaverde-com:device:vcrdvd:1"
#define DEVICETYPE_DVD_BLURAY           "urn:schemas-micasaverde-com:device:dvdbluray:1"
#define DEVICETYPE_RECEIVER             "urn:schemas-micasaverde-com:device:receiver:1"
#define DEVICETYPE_AMP                  "urn:schemas-micasaverde-com:device:amp:1"
#define DEVICETYPE_CD                   "urn:schemas-micasaverde-com:device:cd:1"
#define DEVICETYPE_MISC_HOME_CONTROL    "urn:schemas-micasaverde-com:device:mischomecontrol:1"
#define DEVICETYPE_AV_MISC              "urn:schemas-micasaverde-com:device:avmisc:1"
#define DEVICETYPE_VIRTUAL_DEVICE       "urn:schemas-micasaverde-com:device:VirtualDevice:1"

Device Files

#define DEVICEFILE_BINARY_LIGHT         "D_BinaryLight1.xml"
#define DEVICEFILE_DIMMABLE_LIGHT       "D_DimmableLight1.xml"
#define DEVICEFILE_THERMOSTAT           "D_HVAC_ZoneThermostat1.xml"
#define DEVICEFILE_HEATER               "D_Heater1.xml"
#define DEVICEFILE_HUMIDITY_SENSOR      "D_HumiditySensor1.xml"
#define DEVICEFILE_MULTI_IO             "D_GC100.xml"
#define DEVICEFILE_DOOR_LOCK            "D_DoorLock1.xml"
#define DEVICEFILE_DOOR_SENSOR          "D_DoorSensor1.xml"
#define DEVICEFILE_ZWAVE_NETWORK        "D_ZWaveNetwork.xml"
#define DEVICEFILE_INSTEON_NETWORK      "D_InsteonNetwork.xml"
#define DEVICEFILE_USB_UIRT             "D_USB_UIRT.xml"
#define DEVICEFILE_TEMPERATURE_SENSOR   "D_TemperatureSensor1.xml"
#define DEVICEFILE_POWER_METER          "D_PowerMeter1.xml"
#define DEVICEFILE_MOTION_SENSOR        "D_MotionSensor1.xml"
#define DEVICEFILE_SMOKE_SENSOR         "D_SmokeSensor1.xml"
#define DEVICEFILE_GENERIC_SENSOR       "D_GenericSensor1.xml"
#define DEVICEFILE_LIGHT_SENSOR         "D_LightSensor1.xml"
#define DEVICEFILE_IR_TRANSMITTER       "D_IrTransmitter1.xml"
#define DEVICEFILE_IR_DEVICE            "D_IrDevice1.xml"
#define DEVICEFILE_WINDOW_COVERING      "D_WindowCovering1.xml"
#define DEVICEFILE_SERIAL_PORT_ROOT     "D_SerialPortRoot1.xml"
#define DEVICEFILE_GENERIC_IO           "D_GenericIO1.xml"
#define DEVICEFILE_REMOTE_CONTROL       "D_RemoteControl1.xml"
#define DEVICEFILE_COMBO_DEVICE         "D_ComboDevice1.xml"
#define DEVICEFILE_CAMERA               "D_DigitalSecurityCamera1.xml"
#define DEVICEFILE_SCENE_CONTROLLER     "D_SceneController1.xml"
#define DEVICEFILE_SCENE_CONTR_LED      "D_SceneControllerLED1.xml"
#define DEVICEFILE_ENERGY_CALCULATOR    "D_EnergyCalculator1.xml"
#define DEVICEFILE_AV_MISC              "D_AvMisc1.xml"
#define DEVICEFILE_TEMP_LEAK_SENSOR     "D_TempLeakSensor1.xml"
#define DEVICEFILE_RELAY                "D_Relay1.xml"
#define DEVICEFILE_SIREN                "D_Siren1.xml"
#define DEVICEFILE_FLOOD_SENSOR         "D_FloodSensor1.xml"

#define DEVICEFILE_AV_SCENE             "D_Scene1.xml"

Device Categories

See Luup Device Categories.

HaGateway

Basic functionality for the gateway itself

#define HAGEVICE_FILE                   "S_HomeAutomationGateway1.xml"
#define HAGEVICE_SID                    "urn:micasaverde-com:serviceId:HomeAutomationGateway1"
#define HAGEVICE_STYPE                  "urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"

Variables

#define HAG_ACTIVE_SCENES               "ActiveScenes"
#define HAG_DATAVERSION_USERDATA        "DataVersionUserData" // The current data version for user_data
#define HAG_DATAVERSION_STATUS          "DataVersionStatus" // The current data version for lu_status

Actions

#define HAG_GET_USER_DATA		"GetUserData"  
#define HAG_MODIFY_USER_DATA		"ModifyUserData" 
#define HAG_MODIFY_GET_VARIABLE		"GetVariable" 
#define HAG_MODIFY_SET_VARIABLE		"SetVariable" 
#define HAG_MODIFY_GET_STATUS		"GetStatus" 
#define HAG_MODIFY_GET_ACTIONS		"GetActions" 
#define HAG_MODIFY_CREATE_DEVICE	"CreateDevice" 
#define HAG_MODIFY_DELETE_DEVICE	"DeleteDevice" 
#define HAG_MODIFY_CREATE_PLUGIN	"CreatePlugin" 
#define HAG_MODIFY_DELETE_PLUGIN	"DeletePlugin" 
#define HAG_MODIFY_CREATE_PLUGIN_DEVICE	"CreatePluginDevice" 
#define HAG_IMPORT_UPNP_DEVICE		"ImportUpnpDevice" 
#define HAG_PROCESS_CHILD		"ProcessChildDevices" 
#define HAG_RELOAD			"Reload" 
#define HAG_RUN_SCENE			"RunScene"
#define HAG_SCENE_OFF			"SceneOff"
#define HAG_RUN_LUA			"RunLua"
#define HAG_LOG_IP_REQUEST		"LogIpRequest"

HaDevice

Basic functionality for all home automation devices

#define HADEVICE_FILE                   "S_HaDevice1.xml"
#define HADEVICE_SID                    "urn:micasaverde-com:serviceId:HaDevice1"
#define HADEVICE_STYPE                  "urn:schemas-micasaverde-com:service:HaDevice:1"

Variables

#define HAD_ENERGY_LOG                  "EnergyLog"         // DEVICEDATA_Energy_Log_CONST
#define HAD_IOPORT_DEVICE               "IODevice"          // The device number to connect to for IO (this is on the master device)
#define HAD_IOPORT_DEVICE_XREF          "IODeviceXRef"      // On the port, this is the device number that connects to it
#define HAD_IOPORT_MAX_TIME             "MaxTime"           // The maximum time to leave the socket open before closing and re-opening
#define HAD_IOPORT_PORT                 "IOPort"            // The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port)
#define HAD_IOPORT_PATH                 "IOPortPath"        // Read-only, created at each boot, has the current path to the port
#define HAD_IGNORE_ROOM                 "IgnoreRoom"        // DEVICEDATA_Room_Not_Required_CONST
#define HAD_COMM_FAILURE                "CommFailure"
#define HAD_POLLING_ENABLED             "PollingEnabled"
#define HAD_POLL_MIN_DELAY              "PollMinDelay"
#define HAD_CONFIGURED                  "Configured"
#define HAD_JOBID                       "JobID"
#define HAD_REVERSE                     "ReverseOnOff"      // DEVICEDATA_Reverse_CONST
#define HAD_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define HAD_LAST_ACTIVITY               "LastActivity"      // Used by the OPower plugin
#define HAD_AUTO_CONFIGURE              "AutoConfigure"     // DEVICEDATA_Auto_Configure_CONST
#define HAD_LAST_TIME_CHECK             "LastTimeCheck"     // Only for devices that are capable of implementing time this is when the time was last checked
#define HAD_LAST_TIME_OFFSET            "LastTimeOffset"    // For HAD_LAST_TIME_CHECK this is the timezone offset from UTC when the time was last checked
#define HAD_FIRST_CONFIGURED            "FirstConfigured"   // The date this was first configured
#define HAD_BATTERY_LEVEL               "BatteryLevel"      // DEVICEDATA_Battery_Level_CONST
#define HAD_BATTERY_DATE                "BatteryDate"       // The date when the battery level was reported
#define HAD_BATTERY_ALARM               "BatteryAlarm"      // DEVICEDATA_Battery_Alarm_CONST
#define HAD_DOCUMENTATION               "Documentation"  
#define HAD_ALARM                       "sl_Alarm"

Actions

#define HAD_RECONFIGURE                 "Reconfigure"
#define HAD_REMOVE                      "Remove"
#define HAD_POLL                        "Poll"
#define HAD_SET_POLL_FREQUENCY          "SetPollFrequency"
#define HAD_STRESS_TEST                 "StressTest"
#define HAD_TOGGLE_STATE                "ToggleState"


ZWaveNetwork

Basic functionality for all ZWave devices

#define ZWN_FILE                        "S_ZWaveNetwork1.xml"
#define ZWN_SID                         "urn:micasaverde-com:serviceId:ZWaveNetwork1"
#define ZWN_STYPE                       "urn:schemas-micasaverde-org:service:ZWaveNetwork:1"

#define ZWN_RESET_NETWORK               "ResetNetwork"
#define ZWN_RECONFIGURE_ALL             "ReconfigureAllNodes"
#define ZWN_REMOVE_NODES                "RemoveNodes"
#define ZWN_ADD_NODES                   "AddNodes"
#define ZWN_DOWNLOAD                    "DownloadNetwork"
#define ZWN_HEAL_NETWORK                "HealNetwork"
#define ZWN_UPDATE_NETWORK              "UpdateNetwork"
#define ZWN_UPDATE_NEIGHBORS            "UpdateNeighbors"
#define ZWN_SET_POLLING                 "SetPolling"
#define ZWN_SEND_DATA                   "SendData"
#define ZWN_POLL_ALL_NODES              "PollAllNodes"
#define ZWN_SOFT_RESET                  "SoftReset"
#define ZWN_BACKUP_DONGLE               "BackupDongle"
#define ZWN_SCENE_IDS                   "SceneIDs"          // For scene controllers, node#-button#=ZWaveSceneID,...
#define ZWN_PUT_BYTE                    "PutByte"

Variables

#define ZWN_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define ZWN_LAST_HEAL                   "LastHeal"          // DEVICEDATA_LastUpdate_CONST
#define ZWN_ROUTE_FAILURE               "LastRouteFailure"  // DEVICEDATA_LastUpdate_CONST
#define ZWN_LAST_DONGLE_BACKUP          "LastDongleBackup"
#define ZWN_NET_STATUS_ID               "NetStatusID"  
#define ZWN_NET_STATUS_TEXT             "NetStatusText"  
#define ZWN_COM_PORT                    "ComPort"           // DEVICEDATA_COM_Port_on_PC_CONST
#define ZWN_LOCK_COM_PORT               "LockComPort"  
#define ZWN_NODE_ID                     "NodeID"            // The dongle's id
#define ZWN_VERSION_INFO                "VersionInfo"
#define ZWN_HOME_ID                     "HomeID"
#define ZWN_ROLE                        "Role"
#define ZWN_RESET_MODE                  "ResetMode"
#define ZWN_INCLUSION_MODE              "InclusionMode"
#define ZWN_NODETYPE                    "NodeType"
#define ZWN_TIMEOUT                     "Timeout"
#define ZWN_MULTIPLE                    "Multiple"
#define ZWN_SIMULATE_INCOMING           "SimulateIncomingData"
#define ZWN_POLL_ENABLED                "PollingEnabled"
#define ZWN_POLL_DELAY_INITIAL          "PollDelayInitial"
#define ZWN_POLL_DELAY_DEADTIME         "PollDelayDeadTime"
#define ZWN_POLL_MINDELAY               "PollMinDelay"
#define ZWN_POLL_FREQUENCY              "PollFrequency"
#define ZWN_LAST_ERROR                  "LastError"
#define ZWN_DELAY_PROCESSING            "DelayProcessing"
#define ZWN_FAILED_ONLY                 "FailedOnly"
#define ZWN_USE_45                      "Use45"
#define ZWN_USE_MR                      "UseMR"
#define ZWN_TO_3066                     "TO3066"            // indicates when we're going to work around the TO3066 issue
#define ZWN_LIMIT_NEIGHBORS             "LimitNeighbors"    // indicates when we figure manual routing, only consider Z-Wave's neighbors as valid options


ZWaveDevice

Basic functionality for all ZWave devices

#define ZWDEVICE_FILE                   "S_ZWaveDevice1.xml"
#define ZWDEVICE_SID                    "urn:micasaverde-com:serviceId:ZWaveDevice1"
#define ZWDEVICE_STYPE                  "urn:schemas-micasaverde-com:service:ZWaveDevice:1"

Variables

#define ZWD_POLL_SETTINGS               "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
#define ZWD_POLL_COMMANDS               "PollCommands"      // A comma-separated list of command classes/commands to poll.  X means the device won't respond to any poll
#define ZWD_MULTCH_ENDPOINT             "MultiChEndpoint"   // DEVICEDATA_Multi_Channel_End_Point_CONST
#define ZWD_MULTCH_CAPABIL              "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST

#define ZWD_NEIGHBORS                   "Neighbors"         // DEVICEDATA_Neighbors_to_Call_CONST
#define ZWD_NEIGHBORS_INVERSE           "NeighborsInverse"  // Which neighbors see us
#define ZWD_CAPABILITIES                "Capabilities"      // DEVICEDATA_Capabilities_CONST
#define ZWD_SECURITY_FAILED             "SecurityFailed"    // Don't talk to this node with security even if it reports it can
#define ZWD_CONFIG                      "Configuration"     // DEVICEDATA_Configuration_CONST
#define ZWD_LAST_RESET                  "LastReset"         // DEVICEDATA_Last_Reset_CONST
#define ZWD_SCENES_AS_EVENTS            "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
#define ZWD_SCENES_TIMESTAMPS           "ScenesTimestamp"   // DEVICEDATA_Scenes_CONST
#define ZWD_WAKEUP_INTERVAL             "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
#define ZWD_LAST_WAKEUP                 "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
#define ZWD_LAST_ROUTE_UPD              "LastRouteUpdate"   // DEVICEDATA_Last_Route_Update_CONST
#define ZWD_HEALTH                      "Health"            // A rating from 0-5
#define ZWD_HEALTH_DATE                 "HealthDate"        // The date the rating was assigned
#define ZWD_VARIABLES_GET               "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
#define ZWD_VARIABLES_SET               "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
#define ZWD_ASSOCIATION_GET             "AssociationGet"    // DEVICEDATA_Association_Get_CONST
#define ZWD_ASSOCIATION_SET             "AssociationSet"    // DEVICEDATA_Association_Set_CONST
#define ZWD_ASSOCIATION_NUM             "AssociationNum"
#define ZWD_NONCE_ACK                   "NonceACK"
#define ZWD_MANUF_INFO                  "ManufacturerInfo"  // DEVICEDATA_Model_CONST
#define ZWD_VERSION_INFO                "VersionInfo"       // DEVICEDATA_Configuration_CONST
#define ZWD_SETPOINT_INFO               "SetPointInfo" 
#define ZWD_NODE_INFO                   "NodeInfo"          // The Z-Wave node info frame
#define ZWD_INITIAL_NAME                "InitialName"       // The name that was initially set when the node was first added
#define ZWD_CONFIGURED_NAME             "ConfiguredName"    // The user-specified name when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_CONFIGURED_VARIABLE         "ConfiguredVariable" // The user-specified VariablesSet when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_CONFIGURED_ASSOC            "ConfiguredAssoc"   // The user-specified AssociationSet when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_DOCUMENTATION               "Documentation"     // For the Z-Wave options page
#define ZWD_METER_TYPE                  "MeterType"
#define ZWD_METER_SCALE                 "MeterScale"
#define ZWD_ALARM_TYPE                  "AlarmType"
#define ZWD_POLL_OK                     "PollOk"
#define ZWD_POLL_TX_FAIL                "PollTxFail"
#define ZWD_POLL_NO_REPLY               "PollNoReply"
#define ZWD_MANUAL_ROUTE                "ManualRoute"       // A route specified by an end-user
#define ZWD_ALL_ROUTES_FAILED           "AllRoutesFailed"
#define ZWD_AUTO_ROUTE                  "AutoRoute"         // A route chosen by profilings
#define ZWD_IGNORE_DIRECT_SCENE         "IgnoreDirectScene" // See notes in IsSceneControllerEvent

InsteonNetwork

Basic functionality for all Insteon devices

#define INN_FILE                        "S_InsteonNetwork1.xml"
#define INN_SID                         "urn:micasaverde-com:serviceId:InsteonNetwork1"
#define INN_STYPE                       "urn:schemas-micasaverde-org:service:InsteonNetwork:1"

Actions

#define INN_RESET_NETWORK               "ResetNetwork"
#define INN_REMOVE_NODES                "RemoveNodes"
#define INN_ADD_NODES                   "AddNodes"
#define INN_STOP_ADDREM_NODES           "StopAddRemoveNodes"
#define INN_SEND_DATA                   "SendData"

Variables

#define INN_COM_PORT                    "ComPort"           // DEVICEDATA_COM_Port_on_PC_CONST
#define INN_LOCK_COM_PORT               "LockComPort"  
#define INN_LAST_ERROR                  "LastError"
#define INN_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define INN_NET_STATUS_ID               "NetStatusID"  
#define INN_NET_STATUS_TEXT             "NetStatusText"  
#define INN_POLL_ENABLED                "PollingEnabled"
#define INN_POLL_DELAY_INITIAL          "PollDelayInitial"
#define INN_POLL_DELAY_DEADTIME         "PollDelayDeadTime"
#define INN_POLL_MINDELAY               "PollMinDelay"
#define INN_POLL_FREQUENCY              "PollFrequency"
#define INN_NODE_ID                     "NodeID"            // The dongle's id
#define INN_SL_X10_CODE                 "sl_X10Code"


InsteonDevice

Basic functionality for all Insteon devices

#define INDEVICE_FILE                   "S_InsteonDevice1.xml"
#define INDEVICE_SID                    "urn:micasaverde-com:serviceId:InsteonDevice1"
#define INDEVICE_STYPE                  "urn:schemas-micasaverde-com:service:InsteonDevice:1"

Variables

#define IND_POLL_SETTINGS               "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
#define IND_MULTCH_ENDPOINT             "MultiChEndpoint"   // DEVICEDATA_Multi_Channel_End_Point_CONST
#define IND_MULTCH_CAPABIL              "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST

#define IND_NEIGHBORS                   "Neighbors"         // DEVICEDATA_Neighbors_to_Call_CONST
#define IND_CAPABILITIES                "Capabilities"      // DEVICEDATA_Capabilities_CONST
#define IND_CONFIG                      "Configuration"     // DEVICEDATA_Configuration_CONST
#define IND_LAST_RESET                  "LastReset"         // DEVICEDATA_Last_Reset_CONST
#define IND_SCENES_AS_EVENTS            "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
#define IND_WAKEUP_INTERVAL             "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
#define IND_LAST_WAKEUP                 "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
#define IND_LAST_ROUTE_UPD              "LastRouteUpdate"   // DEVICEDATA_Last_Route_Update_CONST
#define IND_VARIABLES_GET               "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
#define IND_VARIABLES_SET               "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
#define IND_ASSOCIATION_GET             "AssociationGet"    // DEVICEDATA_Association_Get_CONST
#define IND_ASSOCIATION_SET             "AssociationSet"    // DEVICEDATA_Association_Set_CONST
#define IND_MANUF_INFO                  "ManufacturerInfo"  // DEVICEDATA_Model_CONST
#define IND_VERSION_INFO                "VersionInfo"       // DEVICEDATA_Configuration_CONST
#define IND_UPDATED_NAME                "UpdatedName"       // DEVICEDATA_Update_Name_CONST


USB UIRT

Basic functionality for USB UIRT

#define UIRT_FILE                       "S_USBUIRT.xml"
#define UIRT_SID                        "urn:micasaverde-com:serviceId:USBUIRT1"
#define UIRT_TYPE                       "urn:schemas-micasaverde-com:service:USBUIRT:1"

Variables

#define UIRT_COM_PORT                   "ComPort"


Camera

Basic functionality for all Cameras

#define CAMDEVICE_FILE                  "S_Camera1.xml"
#define CAMDEVICE_SID                   "urn:micasaverde-com:serviceId:Camera1"
#define CAMDEVICE_STYPE                 "urn:schemas-micasaverde-com:service:Camera:1"

Variables

#define CAM_USERNAME                    "Username"          // DEVICEDATA_AuthUser_CONST
#define CAM_PASSWORD                    "Password"          // DEVICEDATA_AuthPassword_CONST

#define CAM_RELATED_SENSORS             "RelatedSensors"    // Comma separated list: Archive a photo whenever the following sensors are tripped or doors are opened:
#define CAM_SENSOR_ARCHIVE_SEC          "SensorArchiveSeconds" // Integer: And after the sensor(s) are tripped archive the video for  seconds.
#define CAM_RELATED_LIGHTS              "RelatedLights"     // Comma separated list: Which lights should be turned on when viewing this camera:
#define CAM_LIGHT_OPTIONS               "LightOptions"      // V=When I view the camera from the web or phone.
                                                            // S=When the sensor(s) above are tripped and they are armed
                                                            // B=When the sensors above are tripped and they are *not* armed
                                                            // A=When you take an automatic picture for the archive
                                                            // So: VSBA means do them all

#define CAM_AUTO_ARCH_SEC               "AutoArchiveSeconds" // For archival purposes, take a picture from the camera every x seconds
#define CAM_AUTO_PRES_DAYS              "AutoArchivePreserveDays" // and keep the pictures x days
#define CAM_URL                         "URL"               // DEVICEDATA_Path_CONST
#define CAM_DIRECT_URL                  "DirectStreamingURL"
#define CAM_TIMEOUT                     "Timeout"


PanTiltZoom

For Cameras

#define PTZ_FILE                        "S_PanTiltZoom1.xml"
#define PTZ_SID                         "urn:micasaverde-com:serviceId:PanTiltZoom1"
#define PTZ_STYPE                       "urn:schemas-micasaverde-com:service:PanTiltZoom:1"

Actions

#define PTZ_LEFT                        "MoveLeft"
#define PTZ_RIGHT                       "MoveRight"
#define PTZ_UP                          "MoveUp"
#define PTZ_DOWN                        "MoveDown"
#define PTZ_IN                          "ZoomIn"
#define PTZ_OUT                         "ZoomOut"


SwitchPower1

#define SWP_SID                         "urn:upnp-org:serviceId:SwitchPower1"

Actions

#define SWP_SET_TARGET                  "SetTarget"

Variables

#define SWP_STATUS                      "Status" 
#define SWP_TARGET                      "Target"


S_WindowCovering1

#define WC_SID                          "urn:upnp-org:serviceId:WindowCovering1"

Actions

#define WC_UP                           "Up"
#define WC_DOWN                         "Down"
#define WC_STOP                         "Stop"

Variables

#define WC_STATUS                       "Status"
#define WC_TARGET                       "Target"


Dimming1

#define SWD_SID                         "urn:upnp-org:serviceId:Dimming1"

Actions

#define SWD_SET_LOAD_LEVEL              "SetLoadLevelTarget"

Variables

#define SWD_LOAD_LEVEL_STATUS           "LoadLevelStatus"
#define SWD_LOAD_LEVEL_TARGET           "LoadLevelTarget"


DoorLock1

#define DL_SID                          "urn:micasaverde-com:serviceId:DoorLock1"

Actions

#define DL_SET_TARGET                   "SetTarget"
#define DL_SET_PIN                      "SetPin"
#define DL_CLEAR_PIN                    "ClearPin"
#define DL_SET_PIN_DATE                 "SetPinValidityDate"
#define DL_SET_PIN_WEEK                 "SetPinValidityWeekly"
#define DL_CLEAR_PIN_VALID              "ClearPinValidity"

Variables

#define DL_STATUS                       "Status"
#define DL_TARGET                       "Target"
#define DL_MIN_PIN_SIZE                 "MinPinSize"
#define DL_MAX_PIN_SIZE                 "MaxPinSize"
#define DL_KEEP_PIN_CODES               "KeepPinCodes"
#define DL_SL_USER_CODE                 "sl_UserCode"
#define DL_SL_PIN_FAILED                "sl_PinFailed"
#define DL_SL_LOCK_BUTTON               "sl_LockButton"
#define DL_SL_LOCK_FAILURE              "sl_LockFailure"
#define DL_SL_UNAUTH_USER               "sl_UnauthUser"
#define DL_SL_LOW_BATTERY               "sl_LowBattery"
#define DL_SL_VERY_LOW_BATTERY          "sl_VeryLowBattery"
#define DL_SL_CODE_CHANGED              "sl_CodeChanged"

#define DL_PIN_CODES                    "PinCodes"      // DEVICEDATA_PIN_Codes_CONST
#define DL_NUM_SCHEDULES                "NumSchedules"  // DEVICEDATA_PIN_Codes_CONST


HVAC_UserOperatingMode1

#define HVACO_SID                       "urn:upnp-org:serviceId:HVAC_UserOperatingMode1"

Actions

#define HVACO_SET_MODE                  "SetModeTarget"

Variables

#define HVACO_TARGET                    "ModeTarget"
#define HVACO_STATUS                    "ModeStatus"
#define HVACO_SUPPORTED                 "SupportedType"

HVAC_OperatingState1

#define HVACS_SID                       "urn:micasaverde-com:serviceId:HVAC_OperatingState1"

Variables

#define HVACS_STATE                     "ModeState"
#define HVACS_STATE_ENERGY              "ModeStateForEnergy"


HVAC_FanOperatingMode1

#define HVACF_SID                       "urn:upnp-org:serviceId:HVAC_FanOperatingMode1"

Actions

#define HVACF_SET_MODE                  "SetMode"

Variables

#define HVACF_STATUS                    "Mode"


TemperatureSetpoint1_Heat/Cool

#define HVACHEAT_SID                    "urn:upnp-org:serviceId:TemperatureSetpoint1_Heat"
#define HVACCOOL_SID                    "urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"

Actions

#define HVACHC_SETPOINT                 "SetCurrentSetpoint"

Variables

#define HVACHC_CURRENTSP                "CurrentSetpoint"
#define HVACHC_SETPOINT_TARGET          "SetpointTarget"


TemperatureSensor1

#define TEMP_SID                        "urn:upnp-org:serviceId:TemperatureSensor1"

Variables

#define TEMP_CURRENT                    "CurrentTemperature"


LightSensor1

#define LIGHT_SID                       "urn:micasaverde-com:serviceId:LightSensor1"

Variables

#define LIGHT_CURRENT                   "CurrentLevel"


HumiditySensor1

#define HUM_SID                         "urn:micasaverde-com:serviceId:HumiditySensor1"

Variables

#define HUM_CURRENT                     "CurrentLevel"


SecuritySensor1

#define SES_SID                         "urn:micasaverde-com:serviceId:SecuritySensor1"

Variables

#define SES_ARMED                       "Armed"
#define SES_TRIPPED                     "Tripped"
#define SES_LAST_TRIP                   "LastTrip"

Action

#define SES_SET_ARMED                   "SetArmed"


EnergyMetering1

#define ENE_SID                         "urn:micasaverde-com:serviceId:EnergyMetering1"

Actions

#define ENE_RESETKWH                    "ResetKWH"      // Reset Kwh

Variables

#define ENE_KWH                         "KWH"
#define ENE_KWH_READING                 "KWHReading"    // The time it was last read
#define ENE_KVARH                       "kVARh"
#define ENE_KVAR                        "kVAR"
#define ENE_WATTS                       "Watts"
#define ENE_PULSE                       "Pulse"
#define ENE_ACTUAL                      "ActualUsage"
#define ENE_USER_SUPPLIED               "UserSuppliedWattage"
#define ENE_WHOLE_HOUSE                 "WholeHouse"
#define ENE_LOG                         "Log"


IrTransmitter1

#define IRT_SID                         "urn:micasaverde-com:serviceId:IrTransmitter1"

Variables

#define IRT_SENDPRONTO                  "SendProntoCode"


SerialPort1

#define SPT_SID                         "urn:micasaverde-org:serviceId:SerialPort1"

Variables

#define SPT_BAUD                        "baud"
#define SPT_VENDOR                      "vendor"
#define SPT_PRODUCT                     "product"
#define SPT_PATH                        "path"


SceneController1

#define SCR_SID                         "urn:micasaverde-com:serviceId:SceneController1"

Variables

#define SCR_SL_SCENE_ACTIVATED          "sl_SceneActivated"
#define SCR_SL_SCENE_DEACTIVATED        "sl_SceneDeactivated"
#define SCR_SCENES                      "Scenes"
#define SCR_LAST_SCENE_ID               "LastSceneID"
#define SCR_LAST_SCENE_TIME             "LastSceneTime"
#define SCR_MANAGE_LEDS                 "ManageLeds"
#define SCR_NUM_BUTTONS                 "NumButtons"
#define SCR_FIRES_OFF_EVENTS            "FiresOffEvents"
#define SCR_SCENE_SHORTCUTS             "SceneShortcuts"
#define SCR_ACTIVATION_METHOD           "ActivationMethod"  // 1=BASIC_SET only (ignore scene_activate) 2=SCENE_ACTIVATE only (ignore basic set).  0=anything goes


SceneControllerLED1

#define SCL_SID                         "urn:micasaverde-com:serviceId:SceneControllerLED1"

Actions

#define SCL_SET_LIGHT                   "SetLight"

Variables

#define SCL_LIGHT_SETTINGS              "LightSettings"


GenericIO

#define GIO_SID                         "urn:micasaverde-com:serviceId:GenericIO"

Variables

#define GIO_IS_INPUT                    "IsInput"           // DEVICEDATA_InputOrOutput_CONST, 1 if it's input
#define GIO_DEFAULT_STATE               "DefaultState"      // DEVICEDATA_Default_State_CONST, 0 is 'normal', 1 if it's reversed


IR

#define IR_SID                          "urn:micasaverde-com:serviceId:IrDevice1"

Actions

#define IR_SEND_CODE                    "SendCode"

Variables

#define IR_CODESETS                     "Codesets"
#define IR_CODESET                      "Codeset"
#define IR_REMOTE                       "Remote"
#define IR_MFRID                        "MfrId"
Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox