Luup plugin icons

From MiCasaVerde
Jump to: navigation, search


The Luup plugin static JSON file describes the icon that appears in the dashboard of the UI4 web interface.

Contents

Icon format

All of Vera's icons are 42x42 pixel PNGs with transparency. Icons of other sizes will be resized to 42x42.

Configuration

The top-level key flashicon contains a string. This string is the name of an image file. The filename is either a relative path or a URL starting with "http".

Relative paths

If the filename is a relative path, it is relative to the directory /www/cmh/skins/default on the Vera. If the filename ends in the string ".swf", this extension is changed to ".png". (This is presumably a holdover from UI3, which was flash-based. In UI4, there is no reason to maintain this ruse, so just use the ".png" extension.)

Files installed in the "icons" directory are:

  • Binary_Light.png
  • Binary_Light_0.png
  • Binary_Light_100.png
  • Dimmable_Light.png
  • Dimmable_Light_0.png
  • Dimmable_Light_100.png
  • Dimmable_Light_25.png
  • Dimmable_Light_50.png
  • Dimmable_Light_75.png
  • Door_Lock.png
  • Door_Lock_0.png
  • Door_Lock_100.png
  • Generic_IO.png
  • Humidity_Sensor.png
  • IR_Transmitter.png
  • Insteon.png
  • Ip_Camera.png
  • Light_Sensor.png
  • Motion_Sensor.png
  • Motion_Sensor_0.png
  • Motion_Sensor_100.png
  • Power_Meter.png
  • Scenes.png
  • Temperature_Sensor.png
  • Thermostat.png
  • USB_UIRT.png
  • Window_Covering.png
  • Zwave.png
  • advanced.png
  • default.png
  • default_device.png
  • default_panel.png
  • default_plugins.png
  • device.png
  • devices.png
  • energy.png
  • findvera.png
  • generic_icon.png
  • generic_sensor.png
  • intro.png
  • location.png
  • music_audio.png
  • plugins.png
  • users.png

URLs

If the filename is a URL, it refers to a remote file on a web server.

Constant icons

For an icon that remains the same all the time, the flashicon key is all you need to provide. Ensure that the static JSON file does not contain a DisplayStatus key, and you are done.

Variable icons

For an icon that varies based on the value of a variable, place a DisplayStatus key at the top level of the static JSON file. Its value is a JSON object (associative array) with four keys:

Service
The Service ID of the variable that controls the icon. This can be found in the matching device XML file, under the serviceId element.
Variable
The variable name of the variable that controls the icon.
MinValue
The value that this variable has when it is considered "off" or at "0%". This can even be a string, if the variable is a string that takes two values.
MaxValue
The value that this variable has when it is considered "on" or at "100%". This can even be a string, if the variable is a string that takes two values.

Example for a binary switch:

  "DisplayStatus": {
        "Service": "urn:upnp-org:serviceId:SwitchPower1",
        "Variable": "Status",
        "MinValue": "0",
        "MaxValue": "1"
  }

Example for a variable which takes on a range of values.

  "DisplayStatus": {
        "Service": "urn:upnp-org:serviceId:Dimming1",
        "Variable": "LoadLevelStatus",
        "MinValue": "0",
        "MaxValue": "100" 
  }

The filename in flashicon undergoes a special transformation for variable icons. The extension ".png" is changed to "_0.png", "_25.png", "_50.png", "_75.png" or "_100.png" depending on the value of the service variable, linearly scaled from its range of 0:(MaxValue-MinValue) to 0:100. Values round up; 1-25 produces the "_25" image; 26-50 produces the "_50" image, and so on. For images which are not found (for instance, if the web server returns 404 Not Found) the default image is used.

Consequently, at least three images, and as many as six, should be present for variable-icon plugins. For example, if flashicon contains http://example.com/image.png, the web server must be able to serve:

  • http://example.com/image.png (for when the plugin is loading in the Luup engine)
  • http://example.com/image_0.png
  • http://example.com/image_100.png

and it should be able to serve (if the variable is a sliding scale):

  • http://example.com/image_25.png
  • http://example.com/image_50.png
  • http://example.com/image_75.png

state_icons

From firmware 1.5.401 onwards, you must also tell the Static JSON file which icon files exist, with the state_icons key at the top level. The corresponding value is a JSON array of strings, the file names which should be displayed in the UI. This key was added to prevent the plethora of 404 errors that would appear in the JavaScript console.

Currently each device can have a maximum of 5 icons. The formula for choosing the icon is this:

var status = Variable / (MaxValue - MinValue);
var val = ceil( status * 4 );
var icon = baseIconName + "_" + (isNaN( val * 25 ) ? 0 : (val * 25)) + ".png";


e.g. For the dimmable light, the formula would look like this:

var status = LoadLevelStatus / (100 - 0);
var val = ceil( status * 4 );
var icon = "Dimmable_Light" + "_" + (isNaN( val * 25 ) ? 0 : (val * 25)) + ".png";

The resulting intervals and icons are:

LoadLevelStatus Icon
0 Dimmable_Light_0.png
1 - 25 Dimmable_Light_25.png
26 - 50 Dimmable_Light_50.png
51 - 75 Dimmable_Light_75.png
76 - 100 Dimmable_Light_100.png

Cheating to get finer-grained variable icons

The JavaScript code that inserts the strings "_0" to "_100" into the image filename does not check that the raw variable value is in the range MinValue to MaxValue. By deliberately choosing a MaxValue less than the highest value that a variable can take, you can make the JavaScript load images with "_125", "_150", etc., effectively providing any number of images. MinValue is similarly handled, though the results are odd with negative variables or MinValue not equal to zero: the string inserted into the filename is "_-25", "-50", etc.

That this trick works is probably accidental, and its behaviour probably should not be relied on.

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox